GCodeSimulator - 3D Printing3.12 - Google Play
You'll be able to see results in few seconds.
Publisher Description
Simulate 3D prints and control real 3D printers (Reprap,Printrbot,.)
GCodeSimulatorvisualizes 3D printing gcodes and simulates the 3D print.It shows how your print will look like, allowing you to check your print upfront, making it easier to spot errors and fix them instead of wasting filament. In addition, GCodeSimulator can connect to many 3D printers using USB-OTG cable (or Bluetooth) to control the printer. The printer control panel provides the most important printer controls (e.g. XYZ Movement) for manual operations. This enables you to use any Android tablet or phone as a touch screen for your 3D printer.
See
3dprintapps.de
for more information.
★ 3D Printer control features
Control your 3D printer from your favorite Android device
✔ Connect to the 3D Printer over USB (USB-OTG Adapter required) or wireless (Bluetooth)
✔ Control the 3D printer with your touchscreen (X/Y/Z movements, homing, fan, temperature, etc.).
✔ Load your own gcode file (local file, network, web upload, Gdrive, Dropbox) and run print simulation
✔ Web interface for basic printer controls and show camera picture (Camera permissions required)
✔ Works with many 3D printers (Reprap, PrintrBot, Ultimaker, Renkforce, Velleman, Anet, Tevo, Robot3d, Multec, etc.)
✔ Works with multiple firmwares (Marlin,Smoothie,Repetier)
✔ Support for various printer options (bedsize, baudrates, flip x/y axis, checksums, etc.)
Limitation of the free version
GCodeSimulator(Free) is a limited version of GCodePrintr. Most features incl. manual printer controls are fully available.
The 3D print functionality is restricted, however with version 3.0 the following features can be temporary unlocked by watching reward video Ads.
✔ Full 3D Printing
✔ Support for SD Card printing (upload, list files, autostart print)
✔ Easily modify speed during print and see how it impacts the print time.
Check out the paid GCodePrintr App for more features and without Ads.
★ Visualization and Simulation
GCodeSimulator can visualize gcodes and simulate a 3D print. It recognizes the print speeds and simulates the print in real time, but can also speedup the simulation(fast forward).
Each layer is painted in a different color to see how a layer overlaps with the layer below.
✔ Layer by layer visualization and simulation
✔ 3D View
✔ Show estimated print time
✔ Show remaining print time
✔ Show weight and cost of the printed object
✔ Show speed of X/Y/Z movements and extrusion (min/max/average)
✔ Show Print object dimension and required filament
✔ Show details of each layer
✔ Multiple UI Themes
and more
⚠ Remarks and Limitations
Printer connection requires a Android device with USB-OTG support and a USB-OTG adapter.
Tested with Slic3r, Simplify3d and Skeinforge generated gcodes.
To load files locally from the device or dropbox you need to install a Android file manager (e.g. ES File Explorer)
MakerBot uses a proprietary protocol called S3G where as others use raw G-Code, therefore only the gcode simulation is supported.
Loading very large gcode files might fail, depending on the available memory of the device. OctoPrint support is experimental.
Tip:
Use GCodeSimulator for PC to send files from PC directly to your Android tablet to print them.
✉ Problem Support / Get Help
Join the Google+ community to find help, request features or raise issues
In case of problems please check the FAQ if the problem is already described.
Simply generate a problem report with the app itself (Console menu -> send email), or write an email directly to gcode@dietzm.de.
Google Play Review comments are not adequate for reporting bugs because they don't allow a real communication.
This App uses Google Analytics to collect anonymous statistical data e.g. number of starts, connects via USB OTG/bluetooth. The collected data is only used to improve the App behavior.
About GCodeSimulator - 3D Printing
The company that develops GCodeSimulator - 3D Printing is MDCode. The latest version released by its developer is 3.12.
To install GCodeSimulator - 3D Printing on your Android device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2019-04-13 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the GCodeSimulator - 3D Printing as malware as malware if the download link to de.dietzm.gcodesimulator is broken.
How to install GCodeSimulator - 3D Printing on your Android device:
- Click on the Continue To App button on our website. This will redirect you to Google Play.
- Once the GCodeSimulator - 3D Printing is shown in the Google Play listing of your Android device, you can start its download and installation. Tap on the Install button located below the search bar and to the right of the app icon.
- A pop-up window with the permissions required by GCodeSimulator - 3D Printing will be shown. Click on Accept to continue the process.
- GCodeSimulator - 3D Printing will be downloaded onto your device, displaying a progress. Once the download completes, the installation will start and you'll get a notification after the installation is finished.
Program Details
System requirements
Download information
Pricing
Version History
version 3.12
posted on 2019-04-13
★ Many bug fixes and improvements.
version 3.02
posted on 2018-01-13
Many new features and improvements added:
★ Improved Web Interface with new design
★ More printers and printer features supported
★ Unlock full printing functionality by watching reward video Ads.
★ Many performance and stability improvements
See http://3dprintapps.de/version30.html for a full list of changes.
*Camera permissions required for watching the 3D print remotely over the web interface*
version 2.51
posted on 2016-01-02
See http://3dprintapps.de/version25.html,New 3d View,New Tutorial guide,German translation,New "Recent Files" dialog,New "Fit to Screen" Zoom feature,New Macros - Filament change macro,Move aside when pause,New "Print completion Dialog" and Sharing feature,Easy way to enter Temperatures,Macro special keywords,CH341 serial chip support,Support for non-square and custom bed size,Paint non-print moves (travel) as full lines (for CNC),Tasker Integration
version 0.95
posted on 2013-05-06
Several fixes and updates
Disclaimer
Official Google Play Link
We do not host GCodeSimulator - 3D Printing on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for GCodeSimulator - 3D Printing is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
